TITLE:
Modeling the Drilling Process of Aluminum Composites Using Multiple Regression Analysis and Artificial Neural Networks
AUTHORS:
Ahmad Mayyas, Awni Qasaimeh, Khalid Alzoubi, Susan Lu, Mohammed T. Hayajneh, Adel M. Hassan
KEYWORDS:
Artificial Neural Network; Metal-Matrix Composites (MMCs); Multiple Regression Analysis; Statistical Methods; Machining
JOURNAL NAME:
Journal of Minerals and Materials Characterization and Engineering,
Vol.11 No.10,
October
31,
2012
ABSTRACT: In recent years, aluminum-matrix composites (AMCs) have been widely used to replace cast iron in aerospace and automotive industries. Machining of these composite materials requires better understanding of cutting processes re- garding accuracy and efficiency. This study addresses the modeling of the machinability of self-lubricated aluminum /alumina/graphite hybrid composites synthesized by the powder metallurgy method. In this study, multiple regression analysis (MRA) and artificial neural networks (ANN) were used to investigate the influence of some parameters on the thrust force and torque in the drilling processes of self-lubricated hybrid composite materials. The models were identi- fied by using cutting speed, feed, and volume fraction of the reinforcement particles as input data and the thrust force and torque as the output data. A comparison between two prediction methods was developed to compare the prediction accuracy. ANNs showed better predictability results compared to MRA due to the nonlinearity nature of ANNs. The statistical analysis accompanied with artificial neural network results showed that Al2O3, Gr and cutting feed (f) were the most significant parameters on the drilling process, while spindle speed seemed insignificant. Since the spindle speed was insignificant, it directed us to set it either at the highest spindle speed to obtain high material removal rate or at the lowest spindle speed to prolong the tool life depending on the need for the application.