Article citationsMore>>

S. Souza Anderson, N. L. dos Santos Walter and L. C. Ferreira Sergio, “Application of Box-Behnken Design in the Optimization of an On-Line Pre-Concentration Sys- tem Using Knotted Reactor for Cadmium Determination by Flame Atomic Absorption Spectrometry,” Spectro- chimica Acta Part B, Vol. 60, No. 5, 2005, pp. 737-742. doi:10.1016/j.sab.2005.02.007

has been cited by the following article:

• TITLE: Application of High Tension Roll Separator for the Separation of Titanium Bearing Minerals: Process Modeling and Optimization

  AUTHORS: Srijith Mohanan, Sunil Kumar Tripathy, Y. Ramamurthy, C. Raghu Kumar

  KEYWORDS: High Tension Roll Separator; Response Surface Methodology; Titanium; Box-Behnken Design

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.10, October 31, 2012

  ABSTRACT: The High Tension Roll Separator (HTRS) is one of the main electrostatic unit operations employed to separate titanium minerals like ilmenite, rutile and leucoxene which behave as conducting from zircon, sillimanite, garnet and monazite which behave as non-conducting minerals when a high potential difference is applied. Three process inputs, namely roll speed, feed material temperature and roll speed have been optimized. Experiments were conducted based on the Box- Behnken factorial design; the results were analyzed using response surface methodology (RSM). A new term, called Operational Quality Index (OQI) has been defined as a process output, which is maximized by quadratic programming, to obtain the optimum operating conditions. The maximum value of OQI obtained under the constraints of grade >96% and recovery >98% is 195.53, at the following operating conditions—Temperature: 102°C, Feed Rate: 1.75 tph and Roll Speed: 132 rpm. Under these conditions, the grade and recovery obtained are 96.6% and 98.9% respectively.