Article citationsMore>>

T. Costopoulos and V. Spitas, “Reduction of Gear Fillet Stresses by Using One Sided Involute Asymmetric Teeth,” Mechanism and Machine Theory, Vol. 44, No. 8, 2009, pp. 1524-1534.

has been cited by the following article:

• TITLE: Profile Modification for Increasing the Tooth Strength in Spur Gear Using CAD

  AUTHORS: Shanmugasundaram Sankar, Maasanamuthu Sundar Raj, Muthusamy Nataraj

  KEYWORDS: Bending Stress, Circular Root Fillet, Deflection, Profile Modification, Spur Gear, Trochoidal Root Fillet

  JOURNAL NAME: Engineering, Vol.2 No.9, October 15, 2010

  ABSTRACT: This paper examines the tooth failure in spur gears. Corrective measures are taken to avoid tooth damage by introducing profile modification in root fillet. In general, spur gear with less than 17 numbers of teeth had the problem of undercutting during gear manufacturing process which minimizes the strength of gear at root. In this study, a novel design method, namely circular root fillet instead of the standard trochoidal root fillet is introduced in spur gear and analyzed using ANSYS version 11.0 software. The strength of these modified teeth is studied in comparison with the standard design. The analysis demonstrates that the novel design exhibit higher bending strength over the standard trochoidal root fillet gear. The result reveals that the circular root fillet design is particularly suitable for lesser number of teeth in pinion and where as the trochoidal root fillet gear is more opt for higher number of teeth.