Article citationsMore>>

G. J. Snyder, J. R. Lim, H. Chen-Kuo and J. P. Fleurial, “Thermoelectric Microdevice Fabricated by a MEMS- Like Electrochemical Process,” Nature Materials, Vol. 2, No. 8, 2003, pp. 528-531. doi:10.1038/nmat943

has been cited by the following article:

• TITLE: Evaluating the Energy Efficiency Performance of a Micro Combustor with and without Heat Recuperation

  AUTHORS: D. Y. Jiang, W. M. Yang, N. Aqdas, K. J. Chua

  KEYWORDS: Modular Micro Combustor; Recuperation Temperature Distribution; Emitter Efficiency

  JOURNAL NAME: Open Journal of Energy Efficiency, Vol.1 No.2, September 21, 2012

  ABSTRACT: Micro-combustion research works are motivated by development of portable, autonomous power generators such as the micro TPV with improvement in energy density over batteries. Heat recuperation is a technique which contributes to better energy efficiency performance by recovering heat from the exhaust gas. In this paper, a numerical simulation is carried out to study the impact of incorporating recuperation on the performance of micro modular combustor system. The simulation results have been validated by experiments; achieving close agreement between simulated and experi-mental data. It was observed that the mean wall temperature, radiation power and emitter efficiency markedly improved with the incorporation of a heat recuperator. In addition, 25.8% enhancement of total radiation power and 30.6% emitter efficiency could be realized when the hydrogen air equivalence ratio was 0.9.