Article citationsMore>>

Y. Chen, X. Jia, G. Zhao and X. Wang, “Facile Preparation of Cubic Calcium Carbonate Nanoparticles with Hydrophobic Properties via a Carbonation Route,” Powder Technology, Vol. 200, No. 3, 2012, pp. 144-148. doi:10.1016/j.powtec.2010.02.017

has been cited by the following article:

• TITLE: Fabrication of Sintered Diamond/Metal Composites and Evaluation of Grinding Performance for Sapphire

  AUTHORS: Makoto Inoue, Kenta Yasuda, Tadashi Ito, Tetsu Sasahara, Masaru Yokota, Atsushi Nakahira

  KEYWORDS: Diamond; Composite; Brazing; Ag; Microstructure; Grinding

  JOURNAL NAME: Materials Sciences and Applications, Vol.3 No.9, September 27, 2012

  ABSTRACT: The fabrication of sintered diamond/metal composites bodies composed of diamond filler with the average particle size of 15 μm to 30 μm and metal binder (Ag-Cu-Ti system brazing) was attempted by powder metallurgical sintering process at 700℃ to 1000?C in vacuum atmosphere. As a result, dense bulks of sintered diamond/metal composites were obtained by this powder metallurgical sintering process. The increase of sintering temperatures from 750℃ to 950℃ and of pressure enhanced the density of sintered diamond/metal composites during the hot-pressing in vacuum. All bulks prepared at the temperatures of 750?C to 950℃ were composed of diamond phase and Ag-Cu-Ti system brazing without any other phase for sintered bulks for diamond/metal composites. Furthermore, some properties were evaluated for sintered diamond/metal composites.