Article citationsMore>>

C. M. Sellars and Q. Zhu, “The Effect of Strain Path on Mechanical Behavior and Microstructure,” Proceedings of 20th Riso International Symposium on Materials Science, Deformation-Induced Microstructures, Analysis and Relation to Properties, Roskilde, 6-10 September 1999, pp. 167-182.

has been cited by the following article:

• TITLE: Equal-Channel Angular Pressing as a New Processing to Control the Microstructure and Texture of Metallic Sheets

  AUTHORS: Tong Xiao, Hiroyuki Miyamoto, Toshiyuki Uenoya

  KEYWORDS: Severe Plastic Deformation; Equal-Channel Angular Pressing (ECAP); Recrystallisation; Texture; Ferritic Stainless Steel; Strain Path

  JOURNAL NAME: Materials Sciences and Applications, Vol.3 No.9, September 26, 2012

  ABSTRACT: The extended band structures of as-cold-rolled high Cr steel sheets are recrystallisation-resistant, and tend to become aggregates of the so-called grain colonies as a partially recovered state after final annealing. Such band structures diminish formability and become origin of the so-called ridging. A novel processing will be shown here, which involves strain-path change by introducing one-pass ECAP prior to cold-rolling, and facilitates recrystallisation. Indeed, the recrystallisation temperature was reduced by 100℃, compared with cold-rolling alone imposing an equivalent strain. Grain- scale microshear bands introduced during one-pass ECAP perturbed the banded structures in post-ECAP cold-rolling and enhanced the recrystallisation at the final annealing.