Article citationsMore>>

M. K. Haouaoui, T. Hartwig and A. E. Payzant, “Effect of Strain Path on Texture and Annealing Microstructure Development in Bulk Pure Copper Processed by Simple Shear,” Acta Materialia, Vol. 53, No. 3, 2005, pp. 801- 810. doi:10.1016/j.actamat.2004.10.032

has been cited by the following article:

• TITLE: Equal-Channel Angular Pressing as a New Processing to Control the Microstructure and Texture of Metallic Sheets

  AUTHORS: Tong Xiao, Hiroyuki Miyamoto, Toshiyuki Uenoya

  KEYWORDS: Severe Plastic Deformation; Equal-Channel Angular Pressing (ECAP); Recrystallisation; Texture; Ferritic Stainless Steel; Strain Path

  JOURNAL NAME: Materials Sciences and Applications, Vol.3 No.9, September 26, 2012

  ABSTRACT: The extended band structures of as-cold-rolled high Cr steel sheets are recrystallisation-resistant, and tend to become aggregates of the so-called grain colonies as a partially recovered state after final annealing. Such band structures diminish formability and become origin of the so-called ridging. A novel processing will be shown here, which involves strain-path change by introducing one-pass ECAP prior to cold-rolling, and facilitates recrystallisation. Indeed, the recrystallisation temperature was reduced by 100℃, compared with cold-rolling alone imposing an equivalent strain. Grain- scale microshear bands introduced during one-pass ECAP perturbed the banded structures in post-ECAP cold-rolling and enhanced the recrystallisation at the final annealing.