Article citationsMore>>

J. J. del Coz Díaz, P. J. García Nieto, C. Betegón Biempica and M. P. Prendes Gero, “Analysis and Optimization of the Heat-Insulating Light Concrete Hollow Brick Walls Design by the Finite Element Method,” Applied Thermal Engineering, Vol. 27, No. 8-9, 2007, pp. 1445- 1456doi:10.1016/j.applthermaleng.2006.10.010

has been cited by the following article:

• TITLE: Finite Element Modeling Of Low Heat Conducting Building Bricks

  AUTHORS: O. O. Oluwole, J. S. Joshua, H. O. Nwagwo

  KEYWORDS: Building Bricks; Finite Element Modeling; Heat Conduction

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.8, August 20, 2012

  ABSTRACT: Heat conduction through conventional and interlocking building bricks with cavities was studied in this work. Heat transfer analysis was carried out using MATLAB? partial differential equation toolbox. Regular and staggered hole arrangements were studied. Results showed that four staggered holed interlocking bricks were effective in thermal resistance into the bricks and increasing the holes beyond four did not give any thermal resistance advantage. For the conventional bricks staggered holes did not give any thermal resistance advantage but the four-holed bricks were also adjudged to be effective in thermal resistance into the brick surface. Increasing the number of holes beyond four in conventional bricks did give some thermal resistivity advantage but very minimal. Structural strengths of holed bricks were not considered in this study.