Article citationsMore>>

K. Umanath, S. T. Selvamani and K. Palanikumar, “Friction and Wear Behaviour of Al-6061 Alloy (SiCp +Al₂O_3p) Hybrid Composites,” International Journal of Engineering Science and Technology, Vol. 3, No. 7, 2011, pp. 5441-5451.

has been cited by the following article:

• TITLE: Optimization of Friction and Wear Behaviour in Hybrid Metal Matrix Composites Using Taguchi Technique

  AUTHORS: V. C. Uvaraja, N. Natarajan

  KEYWORDS: Hybrid Metal Matrix Composites; Stir-Cast; Dry Sliding Wear, Orthogonal Array; Taguchi Technique; Analysis of Variance

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.8, August 20, 2012

  ABSTRACT: Al-7075 alloy-base matrix, reinforced with mixtures of silicon carbide (SiC) and boron carbide (B4C) particles, know as hybrid composites have been fabricated by stir casting technique (liquid metallurgy route) and optimized at different parameters like sliding speed, applied load, sliding time, and percentage of reinforcement by Taguchi method. The specimens were examined by Rockwell hardness test machine, Pin on Disc, Scanning Electron Microscope (SEM) and Optical Microscope. A plan of experiment generated through Taguchi’s technique is used to conduct experiments based on L27 orthogonal array. The developed ANOVA and the regression equations were used to find the optimum wear as well as co-efficient of friction under the influence of sliding speed, applied load, sliding time and percentage of reinforcement. The dry sliding wear resistance was analyzed on the basis of “smaller the best”. Finally, confirmation tests were carried out to verify the experimental results.