Article citationsMore>>

H. H. Evinger and M. Muskat, “Calculations of The- oretical Productivity Factor,” Transaction of American Institute of Mining, Metallurgical, and Petroleum Engi- neers, Vol. 146, No. 1, 1942, pp. 126-139.

has been cited by the following article:

• TITLE: A Review of Geothermal Type-Curves with Damage Effect: A Case of Practical Apply to a Mexican Geothermal Field

  AUTHORS: Siomara López-Blanco, Alfonso Aragón-Aguilar, Víctor Arellano-Gómez, Georgina Izquierdo-Montalvo, Sócrates Santoyo-Gutiérrez, Abel Hernández-Ochoa

  KEYWORDS: Geothermal Reservoir; Inflow Performance Relationships; Type-Curves; Damage Effect; Well Production; Mass Flow Rate; Output Curves

  JOURNAL NAME: International Journal of Geosciences, Vol.3 No.3, July 20, 2012

  ABSTRACT: A review of the art state was developed about the inflow relationships and their application for reservoir characterization. The theoretical development of the methodology for determining the damage effect using type-curves of the inflow relationships was shown. We show the process followed for achieve the geothermal type-curve affected with damage for reservoirs with mean salinities of 30000 ppm and temperatures up to 350℃. This type-curve was applied using measurement production data in a Mexican geothermal field. According with the obtained results is shown that the methodology for determining the damage effect using production measurements is a sure alternative for the damage effect calculation. It was used an alternative methodology in order to validate the damage presence and the obtained results were consistent. Last thing shows that both methodologies can be combined as a confident manner.