Article citationsMore>>

E. A. Brocchi and F. J. Moura, “Chlorination Methods Applied to Recover Refractory Metals from Tin Slags,” Minerals Engineering, Vol. 21, No. 2, 2008, pp. 150-156. doi:10.1016/j.mineng.2007.08.011

has been cited by the following article:

• TITLE: Model for Prediction of the Concentration of Extracted Tin during Leaching of Cassiterite in Potassium Hydroxide Solution

  AUTHORS: Onyedika Gerald, Ugwu Priscilla, Ogwuegbu Martin, Ejike Emmanuel, Nwoye Chukwuka, Jiann-Yang Hwang

  KEYWORDS: Model; Tin; Potassium Hydroxide; Cassiterite; Leaching

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.7, July 25, 2012

  ABSTRACT: Model for prediction of the concentration of tin extracted during potassium hydroxide leaching of cassiterite has been derived. The model: A = Nt1.53, indicates that the concentration tin extracted is dependent on the residence time. It was found that the validity of the model is rooted in the expression Log A = Log (Nt1.53). Tin extraction per unit time as obtained from experiment and derived model are 2.6666 and 2.6268 mg/min respectively. The maximum deviation of the model-predicted concentration of dissolved tin from the corresponding concentration obtained from the experiment was found to be less than 8%, which is quite within the acceptable deviation limit of experimental results and hence, impacting about 92% confidence coefficient on the model.