Article citationsMore>>

M. M. Areco, et al., “Biosorption of Cu(II), Zn(II), Cd(II) and Pb(II) by Dead Biomasses of Green Alga Ulva Lac- tuca and the Development of a Sustainable Matrix for Adsorption Implementation,” Journal of Hazardous Materials, Vol. 213-214, 2012, pp. 123-132.doi:10.1016/j.jhazmat.2012.01.073

has been cited by the following article:

• TITLE: Synthesis and Characterization of Mesoporous Aluminosilicates for Copper Removal from Aqueous Medium

  AUTHORS: David Alejandro de Haro-Del Río, Alberto Florentino Aguilera-Alvarado, Irene Cano-Aguilera, Merced Martínez-Rosales, Stuart Holmes

  KEYWORDS: Mesoporous Aluminosilicates; Surface Properties; Copper Adsorption

  JOURNAL NAME: Materials Sciences and Applications, Vol.3 No.7, July 19, 2012

  ABSTRACT: In this study the characterization of an aluminosilicate synthesized from commercial Al2(SO4)3 and colloidal SiO2 is presented, as well as its capacity for the removal of copper from aqueous solution. Characterization of the synthesized material was performed using X-ray diffraction, BET nitrogen adsorption-desorption, mass titration and the Boehm method. In order to obtain stable agglomeration and enhance its surface area (165 - 243 m2/g) and solid adsorbing capabilities, the molar ratio SiO2:Al2O3 (1:3, 1:1 and 3:1) was studied, the solubility of the preparation material, synthesis-procedure time and solution pH function were also examined. The maximum capacity to remove copper ions from an aqueous solution by synthesized aluminosilicate was 16 mg/g at pH 4 and 25℃. The Langmuir model fitted better to the copper adsorption experimental data.