Article citationsMore>>

Uyyuru R.K, Surappa M.K. and Brusethang S, “Effect of reinforcement volume fraction and size distribution on the tribological behavior of Al – Composite”, Wear, vol.206, 2006, pp.1248 – 1255.

has been cited by the following article:

• TITLE: Dry Sliding Wear Behaviour of Aluminium/Be3Al2(SiO3)6 Composite Using Taguchi Method

  AUTHORS: H. B. Bhaskar, Abdul Sharief

  KEYWORDS: AMMC’s; Wear; Orthogonal Array; ANOVA; Taguchi Method

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.11 No.7, July 25, 2012

  ABSTRACT: The present study deals with investigation relating to the influence of wear parameters like sliding speed, applied load and sliding distance on the dry sliding wear of aluminium metal matrix composites. The design of experiment approach was employed to acquire data in controlled way using Taguchi method. A Pin-on-disc apparatus was used to conduct the dry sliding wear test. An orthogonal array, signal-to-noise ratio and analysis of variance were employed to investigate the wear behavior of aluminium and it’s composite. The mathematical model was obtained to determine the wear rate of the aluminium and it’s composite. The confirmation tests were conducted to verify the experimental results. The incorporation of Be3Al2(SiO3)6 as reinforcement material in aluminium matrix material improves the tribological characteristics.