Article citationsMore>>

M. A. Belaid, K. Ketata, K. Mourgues, M. Gares, M Masmoudi and J. Marcon, “Reliability Study of Power RF LDMOS Device under Thermal Stress,” Microelectronics Journal, Vol. 38, No. 2, 2007, pp. 164-170. doi:10.1016/j.mejo.2006.08.004

has been cited by the following article:

• TITLE: Steady State Temperature Study on RF LDMOS with Structure Modification

  AUTHORS: Xiaohong Sun, Haodong Wu, Qiang Chen, Huai Gao

  KEYWORDS: RF LDMOS; 3D Steady-State Temperature; Die Thickness; Pitch S length; Finger Width;

  JOURNAL NAME: Engineering, Vol.4 No.7, July 3, 2012

  ABSTRACT: This paper is devoted to temperature analysis on power RF LDMOS with different feature parameters of die thickness, pitch S length and finger width. The significance of these three parameters is determined from temperature comparison obtained by 3D Silvaco-Atlas device simulator. The first three simulations focus on temperature variation with the three factors at different output power density respectively. The results indicate that both the thinner die thickness and the broaden pitch S length have distinct advantages over the shorter finger width. The device, at the same time, exhibits higher temperature at a larger output power density. Simulations are further carried out on structure with combination of different pitch s length and die thickness at a large 1W/mm output power density and the temperature reduction reaches as high as 55%.