Article citationsMore>>

Kemal, D.,Vanja, A.,and Dragan,R. (2005) The Influence of Extrusion Process and Heat Treatment on the Properties of some AA6000 Extruded Profiles, Material Technology (MTAEC9), 39(4): 101-106.

has been cited by the following article:

• TITLE: Evaluating the Influence of Ageing Temperature on the Mechanical Properties of Al-Mg-Si Alloy

  AUTHORS: I.O. Oladele, J.A. Omotoyinbo

  KEYWORDS: Ageing temperature, mechanical properties, solution treated, specimen.

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.14, November 25, 2011

  ABSTRACT: The effect of ageing temperature on the mechanical properties of Al-Mg-Si alloy has been studied. The material was machined into different shapes of the tests to be carried out: tensile, impact and hardness. The test specimens were divided into two and, some sets were solution treated at 500℃ for one hour and peak aged at 160℃ for eight hours while the other sets were solution treated at 500℃ for one hour and peak aged at 180℃ for eight hours. The abovementioned tests were carried out on the specimens. The results show that at low ageing temperature of 160℃, the ductility and impact were high while at 180℃, the ultimate tensile strength and hardness are higher compared to the value obtained at 160℃.