Article citationsMore>>

Nwoye, C. I., (2009). Model for Predicting the Quantity of Water Evaporated during Initial Stage Drying of Wet Clay Designated for Production of Bricks. J. Min., Mat., Characterization & Eng. 8(8):647-658.

has been cited by the following article:

• TITLE: Model for Predictive Analysis of the Quantity of Water Evaporated during the Primary-Stage Processing of Bioceramic Material Sourced from Kaolin

  AUTHORS: C. I. Nwoye, K. Okeke, M. C. Obi, U. Nwanyanwu, G. C. Obasi, O. O. Onyemaobi

  KEYWORDS: Model, Water Evaporation, Processing, Bioceramic Material.

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.2, February 20, 2010

  ABSTRACT: Model for predicting the quantity of water evaporated during the primary-stage processing of a bioceramic material sourced from kaolin has been derived. The model; E = Exp[0.3424(LogT)2.439] shows that the quantity of evaporated water during the drying process is dependent on the drying temperature, the evaporating surface being constant. It was found that the validity of the model is rooted on the expression (Logβ x lnE)N= LogT where both sides of the expression are correspondingly approximately equal to 2. The respective deviation of the model-predicted quantity of evaporated water from the corresponding experimental value was found to be less than 19% which is quite within the acceptable deviation range of experimental results, hence depicting the usefulness of the model.