Article citationsMore>>

Imasogie.B.I and Wendt.U. (2004) “Characterization of Graphite Particle Shape in Spheroidal Graphite Iron using a Computer-based Image Analyzer”, Journal of Minerals & Materials Characterization & Engineering, 3(1), 1-12,.

has been cited by the following article:

• TITLE: Simulation Studies of Nodular Iron’s Bull’s Eye Effect on Stress Concentration under Plane Stress Conditons

  AUTHORS: O.O. Oluwole, O.E. Olorunniwo

  KEYWORDS: Simulation, Ductile iron, Bull’s eye, Stress concentration, Plane stress

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.6 No.2, October 20, 2007

  ABSTRACT: A simulation study on the effect of the “bull’s eye” in ductile iron on stress concentrations was done in this work. Using the model of graphite nodules in a cavity, a two dimensional plate strip was subjected to plane stress conditions. The results were compared to the traditional theory of modeling the graphite as holes (cavity) in the iron matrix. In plane stress conditions, while the graphite in the hole model showed the hole as areas of stress concentration and therefore very critical as regards fracture, the hole model showed stress concentrated away from the holes making the holes not very critical factor as regards fracture. It was observed that areas of stress application were more critical than the voids when using the hole model. Also the graphite in the hole model was able to predict the good damping behaviour of ductile iron and the increasing elongation with decreasing nodule count.