Article citationsMore>>

Hartman, R.P.A., Borra, J.P., Brunner, D.J., Marijnissen, J.C.M. and Scarlett, B. (1999) The evolution of electrohydrodynamic sprays produced in the cone-jet mode, a physical model. Journal of Electrostatics, 47, 143-170. doi:10.1016/S0304-3886(99)00034-0

has been cited by the following article:

• TITLE: Generation of biomaterial particles with controlled dimensions via electrospraying

  AUTHORS: Xiang Li, Gaorong Han, Jie Huang, Mohan Edirisinghe, William Bonfield

  KEYWORDS: Electrospraying; Hydroxyapatite; Nozzle Geometry Effect

  JOURNAL NAME: Open Journal of Regenerative Medicine, Vol.1 No.1, June 29, 2012

  ABSTRACT: It is well known that small biomaterial particles can lead to superior properties demanded by advanced applications in tissue engineering. Electrospraying has been considered as a promising approach to prepare fine particles, but reducing the particle size during such jetting process is always challenging. This is because the size of the as-sprayed particles is always limited by the device outlet diameter used. In the study we show that hydroxyapatite (HA) relics of 2 - 3 μm with low standard deviation can be deposited using a large nozzle (diameter of 1100 μm) only by reducing the nozzle tip angle from 90° to 15°. The mechanism of such phenomenon was extensively discussed, and a range of refined HA patterns were successfully prepared using the updated electrspraying configuration. We anticipate our findings to have a significant impact on the research of nanostructured biomaterials with superior properties which are realized by reducing the particle size using a greener electrically-driven processing technique.