Article citationsMore>>

G. J. Kulik and J. C. Daley, “Aluminum Dross Processing in the 90‘s“, J. H. L. van Linden, D. L. Stewart, Jr, and Y Sahai (eds.), Second International Symposium– Recycling of Metals and Engineered Materials, Warrendale PA, TMS, 1990. p. 427.

has been cited by the following article:

• TITLE: Recovery of Metals from Aluminum Dross and Saltcake

  AUTHORS: J.Y. Hwang, X. Huang, Z. Xu

  KEYWORDS: Eddy current, recycling, aluminum slag

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.5 No.1, June 12, 2006

  ABSTRACT: Various aluminum-smelting by-products from three production sources were received and characterized. The waste materials were tested for compound identification and environmental acceptance. A coarse metallic aluminum recovery test using an Eddy Current separator (ECS) was performed using two different Circuit configurations. White dross performed equally well with either Circuit, while black dross processing shows significant difference on the separation results. It was found that ECS technology was effective for particle sizes down to 6-10 mesh.