Article citationsMore>>

Hall, J S (1977) Composite mineral particles – analysis by automated scanning electron microscopy, PhD thesis, JKMRC, The University of Queensland, Brisbane.

has been cited by the following article:

• TITLE: Automated Scanning Electron Microscope Based Mineral Liberation Analysis An Introduction to JKMRC/FEI Mineral Liberation Analyser

  AUTHORS: Ying Gu

  KEYWORDS: Scanning Electron Microscope, Mineral Liberation Analysis.

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.2 No.1, June 12, 2003

  ABSTRACT: This paper presents the methods and techniques used in the recently developed JKMRC/FEI Mineral Liberation Analyser (MLA). The MLA system consists of a specially developed software package and a standard modern SEM fitted with an energy dispersive spectrum (EDS) analyser. The on-line program of the MLA software package controls the SEM, captures sample images, performs necessary image analysis and acquires EDS x-ray spectra unattended. Typically, 40 to 100 images (containing 4000 to 10,000 particles) are acquired for each sample block and a dozen blocks (of 30 mm in diameter) are measured overnight. The MLA off-line processing program transforms raw particle image with x-ray data into particle mineral maps and calculates bulk and liberation data from particle mineral maps.