Article citationsMore>>

M. Sumita, T. Shizuma, K. Miyasaka and K. Ishikawa, “Effect of Reducible Properties of Temperature, Rate of Strain, and Filler Content on the Tensile Yield Stress of nylon 6 Composites Filled with Ultrafine Particles,” Journal of Macromolecular Science, Part B: Physics, Vol. 22, No. 4, 1983, pp. 601-618. doi:10.1080/00222348308224779

has been cited by the following article:

• TITLE: Enhancement in Mechanical Properties of Polystyrene Filled with Carbon Nano-Particulates (CNPS)

  AUTHORS: Ayman A. Aly, Moustafa M. Mahmoud, Adel A. Omar

  KEYWORDS: Polymer Composites; Carbon Nano-Particulates (CNPS); Mechanical Properties; Tribological Properties

  JOURNAL NAME: World Journal of Nano Science and Engineering, Vol.2 No.2, June 22, 2012

  ABSTRACT: The idea of adding reinforcing materials, or fillers, to polymers has been around for many decades. The reason for the creation of polymer composite materials came about due of the need for materials with specific properties for specific applications. For example, composite materials are unique in their ability to allow brittle and ductile materials to become softer and stronger. It is expected that good tribological properties can be obtained for polymers filled with nano-scale fillers. A soft plastic can become harder and stronger by the addition of a light weight high stiffness material. In the present work, the effect of adding different percentages of carbon nano-particulates to polystyrene (PS) on the mechanical properties of nano-composites produced was investigated. Based on the experimental observations, it was found that as the percentage of the carbon nano-particulates (CNPS) increased hardness increased and consequently friction coefficient remarkably decreased.