Article citationsMore>>

E. V. Monakhov, R. Balasundaraprabhu, N. Muthukumarasamy and B. G. Svensson, “Electronic Properties of the Interface between Si and Sputter Deposited Indium- Tin Oxide,” Materials Science and Engineering: B, Vol. 159-160, 2009, pp. 314-317. doi:10.1016/j.mseb.2008.11.023

has been cited by the following article:

• TITLE: Current-Voltage Characteristics of ITO/p-Si and ITO/n-Si Contact Interfaces

  AUTHORS: Gopal G. Pethuraja, Roger E. Welser, Ashok K. Sood, Changwoo Lee, Nicholas J. Alexander, Harry Efstathiadis, Pradeep Haldar, Jennifer L. Harvey

  KEYWORDS: Sputtered Amorphous Silicon; Electrical Contact Characteristics; ITO/Si Contact

  JOURNAL NAME: Advances in Materials Physics and Chemistry, Vol.2 No.2, June 20, 2012

  ABSTRACT: We investigated the electrical contact characteristics of indium tin oxide (ITO)/doped hydrogenated amorphous silicon (a-Si:H) junctions. For efficient collection of photo-generated carriers, photovoltaic and photodetector devices require good ohmic contacts with transparent electrodes. The amorphous-Si thin films were sputter deposited on ITO coated glass substrates. As-deposited p-type a-Si:H on ITO formed nearly ohmic type contacts and further annealing did not improve the contact characteristics. On the other hand, as-deposited n-type a-Si:H on ITO formed an ohmic contact, while further annealing resulted in a Schottky type contact. The ITO contact with p-type silicon semiconductor is a ro-bust ohmic contact for Si based optoelectronic devices.