Article citationsMore>>

M. A. Khan, N. Haque, A. A. Kafi, M. N. Alam and M. Z. Abedin, “Jute Reinforced Polymer Composite by Gamma Radiation: Effect of Surface Treatment with UV Radiation,” Polymer Plastic Technology and Engi-neering, Vol. 45, No. 5, 2006, pp. 607-613.

has been cited by the following article:

• TITLE: Production and Properties of Short Jute and Short E-Glass Fiber Reinforced Polypropylene-Based Composites

  AUTHORS: Md Nuruzzaman Khan, Juganta K. Roy, Nousin Akter, Haydar U. Zaman, Tuhidul Islam, Ruhul A. Khan

  KEYWORDS: Jute Fiber; E-Glass Fiber; Composites; Compression Molding; Polypropylene

  JOURNAL NAME: Open Journal of Composite Materials, Vol.2 No.2, April 26, 2012

  ABSTRACT: Short jute fiber (2 - 3 mm) reinforced polypropylene PP-based composites (20% fiber by weight) were fabricated using compression molding and the mechanical properties were evaluated. Tensile strength (TS), tensile modulus (TM), elongation at break (Eb%), flexural strength (FS), flexural modulus (FM), impact strength (IS), and hardness of the composites were found to be 32 MPa, 850 MPa, 12%, 38 MPa, 1685 MPa, 18 kJ/m2 and 96 shore-A, respectively. Then short E-glass fiber (2 - 3 mm) reinforced PP-based composites (20% fiber by weight) were fabricated and mechanical properties were compared with short jute-based composites. Short jute-based composites showed excellent mechanical properties and comparable to short E-glass-based composites. Soil degradation test of both types of composites indi-cated that jute/PP composites significantly lost much of its mechanical properties but E-glass/PP composites retained major portion of its original integrity. Interfaces of the degraded composites were investigated by scanning electron microscopy and supported the biodegradation properties of jute/PP composites.