TITLE:
Behavior of NiTi Endodontic Instruments Exposed to Irrigating Solutions and Chelating Agents: A Systematic Review
AUTHORS:
Adama Tounkara, Kaman Beavogui, Moussa Doumbouya, Maminirainy Andriantsoa Ravoniarijaona, Fatima Zohra Rouggani
KEYWORDS:
Cyclic Fatigue, EDTA, Nickel-Titanium, Sodium Hypochlorite, Surfactant, Lubricant, Corrosion, Surface Defects, Instrument Fracture, Microcracks
JOURNAL NAME:
Open Access Library Journal,
Vol.13 No.11,
November
20,
2026
ABSTRACT: Objective: The main objective of this systematic review is to study the behavior of NiTi alloy files in the presence of chelating agents and irrigants. This objective will be achieved through specific objectives, namely: a comparative evaluation of the effects of irrigants on the cyclic fatigue of files, a comparative analysis of the effects of irrigants on file topography, and finally a comparison of the effects of irrigants on file corrosion. Materials and Methods: This is a systematic literature review for which our literature search was conducted using PubMed and Google Scholar as the main databases. Eligible studies were published in English or French between 2006 and 2023, and included literature reviews, systematic reviews, meta-analyses and laboratory (in vitro) studies meeting the inclusion criteria. Results: Of the 30 articles identified as meeting the inclusion and exclusion criteria, the study by Pedullà et al. (2014) found that immersion in NaOCl did not reduce the cyclic fatigue of reciprocating or continuously rotating NiTi files, whereas EDTA reduced the fatigue resistance of all instruments after 3 minutes; in addition, immersion in surfactant-containing irrigants did not affect the cyclic fatigue of the instruments, with the exception of Reciproc files immersed in a Hypoclean solution. Along the same lines, a scoping review by Orozco-Ocampo and colleagues (2022), synthesizing secondary evidence on fatigue failure of NiTi files, reports that immersion in NaOCl does not appear to affect cyclic fatigue resistance, whereas immersion in EDTA for more than three minutes is associated with a decrease in this resistance. Furthermore, a study by Sağlam et al. (2012) concluded that the use of 2.5% NaOCl could be recommended to prevent weakening of the ProTaper file, which shows less surface alteration compared with the use of 5% NaOCl and the MTAD solution. A study by De Castro Martins et al. (2006) concluded that immersion in 5.25% NaOCl for 24 hours did not modify the surface characteristics or the fatigue resistance of the instruments tested, whereas simulated shaping was a determining factor in reducing the number of cycles to failure. Cheung and Darvell (2008) concluded that the rotating-bending fatigue resistance of NiTi rotary instruments is brand-dependent and is influenced by NaOCl, which corrodes NiTi instruments by creating microcracks on their surface. Conclusion: This study thoroughly examined the behavior of nickel-titanium alloy files when exposed to various irrigants, focusing in particular on the impact of NaOCl and EDTA solutions. The investigations addressed specific aspects such as cyclic fatigue, potential corrosion and the topographic changes resulting from interactions with different endodontic irrigants. These detailed observations are essential for an in-depth understanding of the complex effects of irrigating solutions on endodontic instruments. The results of this research make a substantial contribution by further clarifying the mechanisms of interaction between NiTi files and irrigants, thus paving the way for significant improvements in clinical endodontic practice. In addition, the study highlights a notable gap in the scientific literature by pointing out the lack of research on the influence of the different forms of EDTA on the behavior of NiTi files. This finding sheds light on a research area that remains largely unexplored, thereby reinforcing the importance and relevance of the present study for the advancement of knowledge in this field.