TITLE:
Electric Arc Plasma Electroconsolidation for the Manufacture of Clay-Ash-Sand Composite Materials
AUTHORS:
Ayi Kévin Ajavon, Diyakadola Dihéénane Bafai, Kékéli Codjo Maurille Aziade, Ablam Lazare Afanou, Bassaï Magnoudéwa Bodjona, Sama Ouro, Gado Tchangbedji
KEYWORDS:
Clay, Wood Ash, Sand, Electroconsolidation, Electric Arc Plasma, Eco-Friendly Bricks
JOURNAL NAME:
Open Journal of Applied Sciences,
Vol.16 No.11,
November
20,
2026
ABSTRACT: Electroconsolidation is a process that involves injecting a sufficient quantity of ions (binder) into clay soil using a chemical solution and then using an electric current to cause these ions to migrate through the soil in order to irreversibly stabilize it. This method of consolidating clay soils—which requires the use of chemical solutions whose ions or combination of ions, form a binder—could have several potential applications in the field of construction materials if it could be optimized by replacing the chemical solution (source of ions) and direct current with an electric arc plasma. It is within this context that this study was conducted, with the goal of developing eco-friendly bricks made from clay, wood ash (industrial waste), and sand using an electric arc plasma-assisted consolidation process. The materials were developed using two approaches. The first approach involves consolidating a mixture of raw material powders (sand, ash, clay) by directly bombarding the mixture with electric arc plasma. The second approach, meanwhile, involves consolidating blocks composed of varying proportions of a mixture of raw materials (sand, ash, clay, and an organic binder) using electric arc plasma. The results of the physicochemical and mineralogical characterizations of the clay (kaolinite), wood ash (70% calcium oxide), and sand (95% silica) confirmed the decision to use them in the production of eco-friendly bricks. The results of the physicochemical characterization of the materials obtained through the first approach revealed, compared to the raw materials, a high iron oxide content in the materials derived from the ash-clay (more than 4%) and clay-sand (more than 8%) mixtures, whereas the material derived from the ash-sand mixture had a high alumina content of more than 10%. This increase in metal oxide confirms, on the one hand, the solubilization of a portion of the metal electrodes within the plasma phase and, on the other hand, that the electric arc plasma can be used as both a source and a means of transporting ions. Microscopic analysis of the materials obtained in the first experiment shows that they have a glassy, amorphous surface. The results of the compressive strength of the materials obtained using the second consolidation method suggest satisfactory structural homogeneity and a selective structural affinity of the plasma consolidation process toward sand-rich matrices compared to clay-rich matrices. Thus, for sand contents ranging from 95% to 0%, compressive strengths ranging from 30.27 ± 0.91 MPa to 14.4 ± 0.23 MPa, respectively, were obtained. These results show that it is therefore possible to manufacture eco-friendly bricks from ash, clay, and sand using only the electric arc plasma-assisted electroconsolidation process.