TITLE:
Loss Minimization and Voltage Profile Improvement Using AC Optimal Power Flow in a Constrained Transmission Network: A Real-Grid Case Study in the Democratic Republic of Congo
AUTHORS:
Seraphin Kasemuana Matototo, Vinny Loemba Vang-Si, Noel Zangio Tchioor Muyimp, Denis Tshiyoyo Nzengu, Adolphe Konifo Ngana
KEYWORDS:
AC Optimal Power Flow, Transmission Losses, Voltage Profile, Constrained Transmission Network, Democratic Republic of Congo
JOURNAL NAME:
Open Journal of Applied Sciences,
Vol.16 No.11,
November
20,
2026
ABSTRACT: This paper investigates the efficiency of AC optimal power flow (AC-OPF) for minimizing transmission losses and improving voltage profiles in a constrained, interconnected power system in the Democratic Republic of Congo. A reduced 17-bus, 19-branch representation of the western transmission system is developed using MATLAB/MATPOWER. The Newton-Raphson load flow establishes the reference operating condition, and an interior-point AC-OPF approach optimizes network operation subject to generation, voltage, and branch-flow constraints. To assess the sensitivity of the optimization results, we study two voltage-control ranges. The reference operating condition shows 54.44 MW active power losses and a minimum voltage of 0.9181 p.u. AC-OPF reduces losses to 48.20 MW (11.45%) and increases the minimum voltage to 0.9787 p.u. under the 0.90 - 1.10 p.u. voltage range. The losses are reduced to 51.78 MW (4.88%) within a narrower range of 0.93 - 1.07 p.u. The voltage is minimum at 0.9426 p.u. The branch-level analysis shows that 84.4% of the reference losses are concentrated in two major transmission corridors, and the southern transfer corridor dominates the optimization benefit. The results show that AC-OPF success in constrained transmission networks depends not only on the optimization algorithm but also on corridor properties and allowed voltage-control margins. The study provides a practical foundation for prioritizing operational optimization and targeted network reinforcement.