TITLE:
Grid-Forming Control Strategies for Inverter-Based Renewable Energy Systems: A Review
AUTHORS:
Kikwaya Viranga Joel
KEYWORDS:
Grid-Forming Control, Inverter-Based Resources, Virtual Synchronous Generator, Droop Control, Virtual Oscillator Control, Low-Inertia Power Systems, Renewable Energy Integration
JOURNAL NAME:
Journal of Power and Energy Engineering,
Vol.14 No.11,
November
17,
2026
ABSTRACT: With the development of inverter-based renewable energy, synchronous generators in power systems are being replaced one by one. With the increase in the share of electricity supply from converter-interfaced wind and photovoltaic power plants, both the rotational inertia and the short-circuit strength of synchronous machines have decreased; thus, conventional grid-following (GFL) control can no longer maintain voltage and frequency in weak-grid and islanded states. Therefore, grid-forming (GFM) control has been introduced in the first stage to make converter-dominated systems act as self-synchronising voltage sources rather than current sources. Review of the State of the Art of GFM Control Strategies for Inverter-Based Renewable Energy Systems. First, the control of GFL and GFM is compared, and then a functional taxonomy is developed to organise the existing schemes into droop-based, synchronous-machine-emulation, oscillator-based families, as well as hybrid and emerging methods. All families are judged by how well they are managed, the degree of inertia and voltage support, and their stability in weak grids. Based on the comparison of several indices, none of them is better; rather, they have different compromises in terms of inertia support, transient response ability, accuracy of power sharing and implementation difficulty. Then, the review will present the main problems of transient stability, multi-converter interaction, fault ride-through and protection coordination, standardisation and data-driven control. Therefore, the field needs to establish common benchmarks, standardise verification procedures, coordinate the control of multiple converters and promote the spread of GFM technology in the system.