TITLE:
Corrosion Mechanism of Stainless Steel Pipes in Contact with PVC-Coated Support Fittings
AUTHORS:
Satoshi Nishida, Kazuya Nishida, Tomoya Takenaka, Taichi Matsumoto, Ryuto Takeichi, Yutaka Yamada, Osamu Sakurada, Masayuki Itagaki, Koji Takada, Kiyoshi Hosoya
KEYWORDS:
Stainless Steel, Corrosion, Chloride, Hot Water Supply Systems
JOURNAL NAME:
Materials Sciences and Applications,
Vol.17 No.11,
November
17,
2026
ABSTRACT: The corrosion behavior of SUS304 stainless steel in acidic chloride solutions containing calcium (Ca) or zinc (Zn) ions was investigated by immersion tests, anodic polarization measurements, and scanning electron microscopy (SEM) observations. Test solutions with pH values of 1.5, 2.0, and 3.0 were prepared to simulate acidic environments generated by polyvinyl chloride leachates. The immersion tests revealed that the corrosion potential in the Ca-containing and Zn-containing solutions was lower than that in the solution containing neither Ca nor Zn, particularly at pH 1.5. SEM observations showed distinct differences in surface morphology between the Ca- and Zn-containing conditions and the condition without Ca or Zn, indicating more extensive corrosion in the presence of Ca and Zn. Anodic polarization measurements demonstrated that the passive region was narrower in the Ca- and Zn-containing solutions and that the pitting potential shifted toward lower values. Furthermore, spike-like fluctuations in the passive current density were observed in the passive region, and these fluctuations became more pronounced with increasing pH. Comparison of the corrosion potentials obtained from the immersion tests and polarization measurements indicated that, under most conditions, the corrosion potential was located within the potential interval in which passive-film instability was observed. These results suggest that the presence of Ca or Zn destabilized the passive film on stainless steel and promoted corrosion, even at pH 3.0, where stainless steel would normally be expected to remain passive. It is proposed that the formation of unstable Ca- or Zn-containing surface films, possibly associated with chromium consumption from the passive film, may have contributed to the deterioration of corrosion resistance. No significant differences were observed between the effects of Ca and Zn under the conditions investigated.