Article citationsMore>>

M. Magnani, P. H. Su-egama, N. Espallargas, S. Dosta, C. S. Fugivara, J. M. Guile-many and A. V. Benedetti, “Influence of HVOF Parameters on the Corrosion and Wear Resistance of WC-Co Coatings Sprayed on AA7050 T7,” Surface and Coatings Technology, Vol. 202, No. 19, 2008, pp. 4746-4757. doi:10.1016/j.surfcoat.2008.04.055

has been cited by the following article:

• TITLE: Influence of Carbon Content of WC-Co Electrode Materials on the Wear Resistance of Electrospark Coatings

  AUTHORS: Alexander A. Burkov, Sergey A. Pyachin, Alexey V. Zaytsev

  KEYWORDS: Hard Coating; Electrospark Deposition; Tungsten Carbide; Wear

  JOURNAL NAME: Journal of Surface Engineered Materials and Advanced Technology, Vol.2 No.2, April 26, 2012

  ABSTRACT: In the electrospark deposition (ESD) of WC-Co materials on low carbon steel, tungsten carbide (WC) decarburization is observed. The use of an inert atmosphere (argon) does not eliminate the problem of tungsten carbide decarburization during electrospark processing. The effect of the carbon concentration of electrode materials on the phase composition and mechanical properties of WC (10 wt% of Co) ESD coatings has been investigated in this work. The introduction of additional carbon (graphite) in the electrode material on the basis of the WC-10%Co leads to an increased amount of WC in the obtained coatings and thus improves their wear resistance.