Article citationsMore>>

Koch, N., Elschner, A., Schwartz, J. and Kahn, A. (2003) Organic Molecular Films on Gold versus Conducting Polymer: Influence of Injection Barrier Height and Morphology on Current-Voltage Characteristics. Applied Physics Letters, 82, 2281-2283.
https://doi.org/10.1063/1.1565506

has been cited by the following article:

• TITLE: PEDOT:PSS Films Uniformly Coated on Polyimide Substrate without Repellence

  AUTHORS: Masato Ohmukai, Kenichi Ohshita

  KEYWORDS: Bar Coat, Polyimide Substrate, Printing Electronics, PEDOT:PSS

  JOURNAL NAME: World Journal of Engineering and Technology, Vol.14 No.4, September 21, 2026

  ABSTRACT: PEDOT:PSS films were grown on polyimide substrates by means of a bar-coating method. The biggest problem is repellency resulting in an obstacle to forming a uniform thin film. Starting PEDOT solution mixed with ethanol, CuSO4 water solution and ethylene glycol at an appropriate ratio was found to be able to reduce repellency prominently to bear a uniform film on plastic substrates. The resistivity of the film becomes lower by 22% when it is heated on a hot plate during drying.