Article citationsMore>>

Zielke, D., Hübler, A.C., Hahn, U., Brandt, N., Bartzsch, M., Fügmann, U., et al. (2005) Polymer-Based Organic Field-Effect Transistor Using Offset Printed Source/Drain Structures. Applied Physics Letters, 87, Article ID: 123508.
https://doi.org/10.1063/1.2056579

has been cited by the following article:

• TITLE: PEDOT:PSS Films Uniformly Coated on Polyimide Substrate without Repellence

  AUTHORS: Masato Ohmukai, Kenichi Ohshita

  KEYWORDS: Bar Coat, Polyimide Substrate, Printing Electronics, PEDOT:PSS

  JOURNAL NAME: World Journal of Engineering and Technology, Vol.14 No.4, September 21, 2026

  ABSTRACT: PEDOT:PSS films were grown on polyimide substrates by means of a bar-coating method. The biggest problem is repellency resulting in an obstacle to forming a uniform thin film. Starting PEDOT solution mixed with ethanol, CuSO4 water solution and ethylene glycol at an appropriate ratio was found to be able to reduce repellency prominently to bear a uniform film on plastic substrates. The resistivity of the film becomes lower by 22% when it is heated on a hot plate during drying.