Article citationsMore>>

Brewer, P.J., Lane, P.A., Huang, J., deMello, A.J., Bradley, D.D.C. and deMello, J.C. (2005) Role of Electron Injection in Polyfluorene-Based Light Emitting Diodes Containing PEDOT:PSS. Physical Review B, 71, Article ID: 205209.
https://doi.org/10.1103/physrevb.71.205209

has been cited by the following article:

• TITLE: PEDOT:PSS Films Uniformly Coated on Polyimide Substrate without Repellence

  AUTHORS: Masato Ohmukai, Kenichi Ohshita

  KEYWORDS: Bar Coat, Polyimide Substrate, Printing Electronics, PEDOT:PSS

  JOURNAL NAME: World Journal of Engineering and Technology, Vol.14 No.4, September 21, 2026

  ABSTRACT: PEDOT:PSS films were grown on polyimide substrates by means of a bar-coating method. The biggest problem is repellency resulting in an obstacle to forming a uniform thin film. Starting PEDOT solution mixed with ethanol, CuSO4 water solution and ethylene glycol at an appropriate ratio was found to be able to reduce repellency prominently to bear a uniform film on plastic substrates. The resistivity of the film becomes lower by 22% when it is heated on a hot plate during drying.