Article citationsMore>>

Aminnaji, M., Tohidi, B., Burgass, R. and Atilhan, M. (2017) Effect of Injected Chemical Density on Hydrate Blockage Removal in Vertical Pipes: Use of MEG/MeOH Mixture to Remove Hydrate Blockage. Journal of Natural Gas Science and Engineering, 45, 840-847.
https://doi.org/10.1016/j.jngse.2017.06.030

has been cited by the following article:

• TITLE: Refractometric Determination of Thermodynamic Hydrate Inhibitor Concentrations under Variable Operating Conditions: A Physicochemical Evaluation

  AUTHORS: Tombari Ransome Mbooh, Ogbonna Friday Joel, Nuka Dumle Nwiabu, Joe Emmanuel Akhagbeme

  KEYWORDS: Gas Hydrate, Refractive Index Measurement, Hydrate Inhibitors Optimization, Inhibitor Actual Concentration, Flow Assurance

  JOURNAL NAME: Advances in Chemical Engineering and Science, Vol.16 No.4, September 3, 2026

  ABSTRACT: Accurate optimization of hydrate inhibition requires knowledge of the actual inhibitor concentration retained in the aqueous phase under operating conditions. This study applied refractometry to determine effective concentrations of monoethylene glycol (MEG) and methanol (MeOH). Calibration curves were developed using known weight-percent solutions, yielding strong correlations between refractive index and concentration (R2 > 0.98). Samples extracted from a mini-hydrate flow loop at varying pressures confirmed a linear relationship between the input dosage and the actual concentration (R2 > 0.99). MEG retained ~95% of its input dosage, while MeOH retained ~90%. Concentrations decreased slightly with lower operating pressures, reflecting volatility and gas-phase partitioning effects. These findings demonstrate refractometry as a reliable, cost-effective method for real-time monitoring and optimization of hydrate inhibitors.