Article citationsMore>>

Wu, Y., German, R.M., Blaine, D., Marx, B. and Schlaefer, C. (2002) Effects of Residual Carbon Content on Sintering Shrinkage, Microstructure and Mechanical Properties of Injection Molded 17-4 PH Stainless Steel. Journal of Materials Science, 37, 3573-3583.
https://doi.org/10.1023/a:1016532418920

has been cited by the following article:

• TITLE: Characterization of a Clay Raw Material from Oualle: Uses in Ceramics

  AUTHORS: Bobet Ouanmini, Ganon François, Bamogo Halidou, Seynou Mohamed, Zerbo Lamine, Gilles Escadeillas

  KEYWORDS: Clay, Ceramics, Tiles

  JOURNAL NAME: Advances in Materials Physics and Chemistry, Vol.16 No.6, June 8, 2026

  ABSTRACT: This paper evaluates Ouallé clay for ceramic applications using geotechnical, chemical, mineralogical, thermal, and firing-based characterization methods. The study finds that the clay is mainly kaolinite-rich, moderately plastic, and potentially suitable as a base material for faience and fired clay products. The fired specimens show acceptable shrinkage, but the porosity remains high and the maximum compressive strength is moderate.