Article citationsMore>>

Prabuwono, A.S., Besari, A.R.A., Zamri, R., Md Palil, M.D. and Taufik, (2011) Surface Defects Classification Using Artificial Neural Networks in Vision Based Polishing Robot. In: Jeschke, S., Liu, H. and Schilberg, D., Eds., Lecture Notes in Computer Science, Springer, 599-608.
https://doi.org/10.1007/978-3-642-25489-5_58

has been cited by the following article:

• TITLE: A Material Removal Prediction Framework for Ball EEM Polishing in Precision Lens Manufacturing

  AUTHORS: Tyler Young, Jacob Guymon, Mark Pankow, Gracious Ngaile

  KEYWORDS: Optics, Machine Learning, Metrology, Modeling, Polishing, Toolpathing

  JOURNAL NAME: World Journal of Engineering and Technology, Vol.14 No.2, April 7, 2026

  ABSTRACT: Lens surface parameters are critical to optical system performance and require increasingly stringent precision due to rising performance demands and continued technological miniaturization. Although machining processes such as diamond turning can produce lenses with high form accuracy, they are not free from surface defects. These defects are typically addressed through post-processing techniques such as polishing; however, depending on defect size and the selected removal process, polishing can become a complex and iterative task. This complexity can be mitigated through the application of machine learning algorithms to predict material removal behavior. This paper presents the development of a material removal prediction framework for ball elastic emission machining (EEM) polishing of lens surfaces, incorporating machine learning tools to improve process predictability and efficiency. The resulting model accepts surface characteristics and process parameters as inputs and predicts the final surface parameters following polishing. The model’s root mean square error (RMSE) is approximately 0.1 µm. Surface parameters achieved using the removal strategy on which this model is based include a peak-to-valley (PV) value of 0.2841 µm and a root mean square (RMS) roughness of 0.032 µm.