Article citationsMore>>

J. H. Lee and B. L. Cooley, “Min-Max Predictive Control Techniques for a Linear State-Space System with a Bounded Set of Input Matrices,” Automatica, Vol. 36, No. 3, 2000, pp. 463-473. doi:10.1016/S0005-1098(99)00178-8

has been cited by the following article:

• TITLE: State Space Model Predictive Control of an Aerothermic Process with Actuators Constraints

  AUTHORS: Mustapha Ramzi, Hussein Youlal, Mohamed Haloua

  KEYWORDS: Multi-Variable Control; Aerothermic Process; Actuators Constraints; Process Identification; State Space Model Predictive Control

  JOURNAL NAME: Intelligent Control and Automation, Vol.3 No.1, February 28, 2012

  ABSTRACT: This paper investigates State Space Model Predictive Control (SSMPC) of an aerothermic process. It is a pilot scale heating and ventilation system equipped with a heater grid and a centrifugal blower, fully connected through a data acquisition system for real time control. The interaction between the process variables is shown to be challenging for single variable controllers, therefore multi-variable control is worth considering. A multi-variable state space model is obtained from on-line experimental data. The controller design is translated into a Quadratic Programming (QP) problem, in which a cost function subject to actuators linear inequality constraints is minimized. The outcome of the experimental results is that the main control objectives, such as set-point tracking and perturbations rejection under actuators constraints, are well achieved for both controlled variables simultaneously.