Article citationsMore>>

Wang, C., Sun, Q., Al-Abadi, A. and Wu, W. (2024) A Combined Computational Fluid Dynamics and Thermal–Hydraulic Modeling Approach for Improving the Thermal Performance of Corrugated Tank Transformers: A Comparative Study. Energies, 17, Article 1802.
https://doi.org/10.3390/en17081802

has been cited by the following article:

• TITLE: CFD Analysis of Natural Oil Convection in Three Phase Transformers between Detailed and Simplified Winding Models

  AUTHORS: Zulkifli Ibrahim, Mohd Zainal Abidin Ab Kadir, Hidayat Zainuddin, Muhammad Sharil Yahaya, Muhammad Fareq Ibrahim

  KEYWORDS: Natural Oil Convection, Hot-Spot Temperature, Hot-Spot Location, CFD, Disc Winding, Layer Winding

  JOURNAL NAME: Journal of Power and Energy Engineering, Vol.13 No.9, September 26, 2025

  ABSTRACT: Accurate prediction of hot-spot temperature is essential for transformer thermal design, as it directly affects load management, performance, and service life. THNM and CFD models are widely used to study temperature distribution in windings. Although CFD offers detailed insights into natural oil convention, it is often complex, time-intensive, and computationally costly. To reduce this complexity, simplified 2D axis-symmetric CFD models are applied, especially for small distribution and medium power transformers. This study evaluates the effectiveness of SW compared to DW. Results indicate that SW is unsuitable for medium power transformers with disc windings due to significant deviations in oil flow velocity and thermal distribution. However, for small distribution transformers with layer windings, SW provides sufficiently accurate results. Overall, SW is recommended during early design stages of both transformer types, where minor variations in average winding temperature are acceptable.