Article citationsMore>>

Mbodji, S., Mbow, B., Barro, F.I. and Sissoko, G. (2011) A 3D Model for Thickness and Diffusion Capacitance of Emitter-Base Junction Determination in a Bifacial Polycrystalline Solar Cell under Real Operating Condition. Turkish Journal of Physics, 35, 281-291.
https://doi.org/10.3906/fiz-0911-25

has been cited by the following article:

• TITLE: Influence of Crystal Dimensions and P-Layer Thickness on the Optimum Doping Rate for the Best Diffusion Capacity of a Polycrystalline Solar Cell

  AUTHORS: Moussa Camara, Moustapha Thiame, Issa Faye, Sada Traore, Mahamat Batran Mouta, Boubacar Fickou, Landing Diatta

  KEYWORDS: Diffusion Capacity, P-Layer, Three-Dimensional, Optimum Doping, Polycrystalline Solar Cell

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.13 No.9, September 15, 2025

  ABSTRACT: After three-dimensional modeling, we expressed the diffusion capacity of p-layer charges through the transition zone as a function of the impurity concentration in the p-layer, the dimensions of a polycrystalline silicon crystal, and the penetration depth of the p-layer. After analyzing the impact of the parameters cited below on the diffusion capacity, we concluded that the best diffusion capacity is obtained for a dopant range between 1015 and 1017 cm−3. This range is modified by variations in crystal size and p-layer thickness. Thus, increasing crystal size shifts the optimum point towards high doping rates, while increasing p-layer thickness shifts the optimum point towards low p-layer doping rates.