Article citationsMore>>

Andruszkow, H., Frink, M., Frömke, C., Matityahu, A., Zeckey, C., Mommsen, P., et al. (2012) Tip Apex Distance, Hip Screw Placement, and Neck Shaft Angle as Potential Risk Factors for Cut-Out Failure of Hip Screws after Surgical Treatment of Intertrochanteric Fractures. International Orthopaedics, 36, 2347-2354.
https://doi.org/10.1007/s00264-012-1636-0

has been cited by the following article:

• TITLE: Osteosynthesis of Proximal Femoral Fractures Using DHS Screw-Plate: Predictive Factors of Mechanical Failures in the Orthopedic Department of Aristide Le Dantec Hospital

  AUTHORS: Malick Diop, Mohamed Daffé, Badara Dembélé, Mayoro Sow, Andre Daniel Sané, Charles Bertin Dieme

  KEYWORDS: Proximal Femoral, DHS Screw-Plate, Predictive Factors, Mechanical Failure

  JOURNAL NAME: Open Journal of Orthopedics, Vol.15 No.9, September 10, 2025

  ABSTRACT: Introduction: The DHS screw-plate remains indicated in our settings. It provides good anatomical and functional results. However, mechanical failures are complications that may arise. Materials and Methods: A retrospective, descriptive, and analytical study was conducted over a two-year period (January 2017 to December 2018) at Aristide Le Dantec Hospital. Predictive factors related to the patient, the fracture, and the surgical technique were investigated. Results: A total of 110 patients underwent surgery during the study period. Sixty-three (63) cases were included, among which 8 mechanical failures (12.69%) occurred. The average age of patients with mechanical failure was 70 years (range: 45 - 86 years). Pre-fracture autonomy (p = 0.009) and a TAD Conclusion: To reduce mechanical failure, the surgical technique must be well-mastered. Fracture reduction should be as anatomical as possible. The TAD should range between 20 and 25 mm.