Article citationsMore>>

Su, L., Wang, F., He, P., Dambon, O., Klocke, F. and Yi, A.Y. (2014) An Integrated Solution for Mold Shape Modification in Precision Glass Molding to Compensate Refractive Index Change and Geometric Deviation. Optics and Lasers in Engineering, 53, 98-103.
https://doi.org/10.1016/j.optlaseng.2013.08.016

has been cited by the following article:

• TITLE: High Efficiency PGM Setup Cycle of Photovoltaic Components via Numerical Simulation

  AUTHORS: Gabriela Kehlerová, Marcel Horák, Ivo Matoušek

  KEYWORDS: PGM-Precision Glass Molding, Elastic-Plastic and Viscoelastic Behavior, Numerical Simulation, FE-Finite Element

  JOURNAL NAME: Materials Sciences and Applications, Vol.16 No.5, May 29, 2025

  ABSTRACT: This study presents a comprehensive analysis of the most important criteria influencing the precision glass molding (PGM) cycle, which was proposed using the finite element (FE) method through the MARC system. The FE models used in numerical simulations were compared with the experimental results of the first phase. The results showed that a significant increase in residual stress in N-BK7 optical glass was manifested in the heating phase in 192 seconds at a temperature of 125˚C. The deformation measurement results of selected experimental samples confirmed the high quality of the surface of the moldings and the accuracy of PGM production. Based on the evaluation of the results, the conditions for the production of photovoltaic glass components were proposed.