TITLE:
Experimental Study of a Solar Thermal Incubator Using a Phase-Change Material for Off-Grid Use
AUTHORS:
Yéouélé Thio, Bati Ernest Boya Bi, Ekoun Paul Magloire Koffi, Prosper Gbaha
KEYWORDS:
Solar Incubator, Vacuum Tube Collector, Encapsulated PCM, Poultry Eggs
JOURNAL NAME:
Open Journal of Applied Sciences,
Vol.14 No.9,
September
13,
2024
ABSTRACT: The aim of this study was to provide a simple, easy-to-use incubation system for small-scale rural poultry farmers far from the electricity grid. To this end, a naturally ventilated solar thermal incubator was built and experimentally tested. A U-shaped evacuated tube collector and a wooden crate holding 50 eggs were used to build the solar thermal incubator. Water was used as the heat transfer fluid, and an EPCM was integrated into the incubation chamber for operation at night or when the sun was hidden. The heat generated by the solar collector and stored in the heat transfer fluid is transported to the incubation chamber by thermosiphon to heat the chamber. Temperature and humidity probes powered by a solar panel were placed at various locations to monitor the thermo-hygrometric efficiency of the incubation system. The incubator, heated by natural convection, proved to function normally, and the incubation chamber was maintained throughout the incubation period within a temperature range of 35.53˚C to 39.53˚C and relative humidity averaging 49.4% to 68.5%. The experiment was carried out by introducing 30 eggs and the results of the experimental study showed that the incubator’s efficiency was 87%. The performance tests gave a fertility rate of 93% and a hatching rate of 93%, i.e. 28 fertile eggs and 26 hatched eggs, respectively.