Article citationsMore>>

Briffod, F., Shiraiwa, T. and Enoki, M. (2020) Monotonic and Cyclic Anisotropies of an Extruded Mg-Al-Ca-Mn Alloy Plate: Experiments and Crystal Plasticity Studies. Materials Science and Engineering: A, 772, Article ID: 138753. https://doi.org/10.1016/j.msea.2019.138753

has been cited by the following article:

• TITLE: Investigation of the Micro-Mechanics of an Extruded Precipitation-Strengthened Magnesium Alloy under Cyclic Loading

  AUTHORS: Chuhao Liu, Xiaodan Zhang, Huamiao Wang, Yinghong Peng

  KEYWORDS: Cyclic Deformation, Magnesium Alloy, In-Situ Neutron Diffraction, Precipitation Strengthening, Crystal Plasticity, Lattice Strain, Mechanism Evolution

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.12 No.7, July 31, 2024

  ABSTRACT: Precipitation strengthening is a crucial microscopic mechanism for enhancing the strength of magnesium alloys. In order to elucidate the influence of precipitation on the microscopic deformation mechanisms and macroscopic mechanical response of magnesium alloys under cyclic loading conditions, we employed a crystal plasticity model to analyze the stress-strain curves, specific crystal plane diffraction intensities, and the temporal evolution of various microscopic deformation mechanisms and twinning volume fractions for an extruded magnesium alloy, AXM10304, containing coherent precipitates. The research findings indicate that precipitation does not fundamentally alter the microscopic mechanisms of this alloy. However, it hinders twinning during the compression stage, mildly promotes detwinning during the tension stage, and enhances tension secondary hardening by elevating the difficulty of activation of the prismatic slip.