Article citationsMore>>

Zheng, Y.J. (2008) Evaluation of a New Method to Estimate the Micropore Volume and External Surface Areaof Single-walled Carbon Nanotubes. Master’s Thesis, University of Tennessee, Knoxville.
https://trace.tennessee.edu/utk_gradthes/3673
https://doi.org/10.4236/ojce.2022.122015

has been cited by the following article:

• TITLE: Comparative Analysis of Statistical Thickness Models for the Determination of the External Specific Surface and the Surface of the Micropores of Materials: The Case of a Clay Concrete Stabilized Using Sugar Cane Molasses

  AUTHORS: Nice Mfoutou Ngouallat, Narcisse Malanda, Christ Ariel Ceti Malanda, Kris Berjovie Maniongui, Erman Eloge Nzaba Madila, Paul Louzolo-Kimbembe

  KEYWORDS: Statistical Thickness Model, External Specific Surface, Microporous Surface, Clay Concrete, Molasses

  JOURNAL NAME: Geomaterials, Vol.14 No.2, April 30, 2024

  ABSTRACT: In this work, four empirical models of statistical thickness, namely the models of Harkins and Jura, Hasley, Carbon Black and Jaroniec, were compared in order to determine the textural properties (external surface and surface of micropores) of a clay concrete without molasses and clay concretes stabilized with 8%, 12% and 16% molasses. The results obtained show that Hasley’s model can be used to obtain the external surfaces. However, it does not allow the surface of the micropores to be obtained, and is not suitable for the case of simple clay concrete (without molasses) and for clay concretes stabilized with molasses. The Carbon Black, Jaroniec and Harkins and Jura models can be used for clay concrete and stabilized clay concrete. However, the Carbon Black model is the most relevant for clay concrete and the Harkins and Jura model is for molasses-stabilized clay concrete. These last two models augur well for future research.