Article citationsMore>>

Uwa, I.J., Oboh, I.O. and Antia, O.O. (2019) Design and Development of a System of Laboratory Fluidized Bed for Drying and Method of Preventing Agglomeration during Fluidization Process. Association of Nigerian Inventions Patent No. F/P/2019/219.

has been cited by the following article:

• TITLE: Mathematical Modelling and Design of Helical Coil Heat Exchanger for Production of Hot Air for Fluidized Bed Dryer

  AUTHORS: Iniubong James Uwa, Uwem Ekwere Inyang, Innocent Oseribho Oboh

  KEYWORDS: Helical Coil Heat Exchanger, Fluidized Bed Dryer, Heat Transfer, Output Air Temperature

  JOURNAL NAME: Advances in Chemical Engineering and Science, Vol.14 No.3, May 31, 2024

  ABSTRACT: In global industrialization, efforts have been made to increase the rate of heat transfer in heat exchanger, minimizing the size of heat exchanger to reduce cost as well as increasing the effectiveness. Helical coil heat exchanger (HCHE) has been proven to be effective in improving heat transfer due to its large surface area. In this study, HCHE was designed to provide hot air needed for fluidized bed drying processes. The HCHE design model was fabricated and evaluated to study the efficiency of the hot air output for a laboratory fluidized bed dryer. The mathematical model for estimation of the final (output) temperature of air, Taf, passing through the HCHE was developed and validated experimentally. The drying of bitter kola particulates was carried out with a drying temperature of 50˚C ± 3˚C and a bed height-to-bed diameter ratio (H/D) of 1.5. The time taken to dry bitter kola particulates to 0.4% moisture content was 1 hour 45 minutes. Hence, HCHE is recommended for use in the production of hot for laboratory-scale fluidized bed dryers.