TITLE:
Study of Sands from Bamendou-West Cameroon: Valorization for Concrete Mix Design
AUTHORS:
Keubou Tatapzia Vladimir Willianov, Guimezap Kenou Willy Chance, Manefouet Bertile Ilalie, Kamga Djoumen Tatiana, Ngapgue François
KEYWORDS:
Residual Sand, Formulation of Concrete, Sand Equivalent, Fitness Modulus, Particle Size, Bamendou
JOURNAL NAME:
Journal of Geoscience and Environment Protection,
Vol.12 No.5,
May
31,
2024
ABSTRACT: Bamendou (West Cameroon), has a huge potential in natural resources, especially sands. However, the use of these materials in civil engineering works leads to the appearance of numerous pathologies which in some cases lead to the total ruin of the works. In order to overcome these infrastructural problems, the main objective of this study is set at the improvement of the service life of structures built in Cameroon using local materials formed under climatic, geological and geotechnical conditions similar to those of materials in Bamendou. Eight sand samples were taken from the most representative and exploited quarries. The identification and classification of the sand taken from the most representative quarries in the study area show that they are mainly clayey, with an average sand equivalent of 57.54. In terms of granulometry, the curves of several sand samples do not fall within the granular range of sands used in the formulation of concrete. The modulus of fineness obtained by particle size analysis varies from 2.91 to 3.92 with an average of 3.31.