Article citationsMore>>

Recommendation ITU-R (2015) “Effects of Building Materials and Structures on Radio Wave Propagation above 100 MHz’’ P Series Radio Wave Propagation P.2040 Vol.1.
https://www.itu.int/dms_pubrec/itu-r/rec/p/R-REC-P.2040-1-201507-S!!PDF-E.pdf

has been cited by the following article:

• TITLE: Experimental Assessment of the Effects of Building Materials on Wi-Fi Signal 2.4 GHz and 5 GHz

  AUTHORS: Sylhane Bytyqi, Besfort Jashari

  KEYWORDS: WLAN, Electric Field, AP, Building Materials, Frequency, Wi-Fi

  JOURNAL NAME: Journal of Computer and Communications, Vol.12 No.5, May 14, 2024

  ABSTRACT: We are all witnesses to the widespread use of wireless LANs (WLAN) and their easy implementation in indoor environments. Wi-Fi is the most popular technology for the WLAN. However, interference caused by building materials is a common, yet often overlooked, contributor to poor Wi-Fi performance. This interference occurs due to the nature of radio wave propagation and the characteristics of the wireless communication system. Therefore, during the implementation of these networks, one must consider the quasi-static nature of the Wi-Fi signal and its dependence on the influence of various building materials on the propagation of these waves. This paper presents the effects of building materials and structures on indoor environments for Wi-Fi 2.4 GHz and 5 GHz. To establish the interdependencies between factors influencing electric field levels, measurements were conducted in an experimental Wi-Fi network at different distances from the access point (AP). The results obtained show that the electric field strength of the Wi-Fi signal decreases depending on the distance, the building materials, and the transmitted frequency. Concrete material had the most significant impact on the strength of the electric field in Wi-Fi, while glass had a relatively minor effect on reducing it. Wi-Fi operates within the radio frequency spectrum, typically utilizing frequencies in the 2.4 GHz and 5 GHz bands. Additionally, measurements revealed that Wi-Fi signal penetration is more pronounced at lower frequencies (2.4 GHz) as opposed to the Wi-Fi signal 5 GHz. The findings can be used to address the impact of building materials and structures on indoor radio wave propagation, ultimately ensuring seamless Wi-Fi signal coverage within buildings.