Article citationsMore>>

Zhou, S.Y., Su, Y., Wang, H., Enz, J., Ebel, T. and Yan, M. (2020) Selective Laser Melting Additive Manufacturing of 7xxx Series Al-Zn-Mg-Cu Alloy: Cracking Elimination by Co-Incorporation of Si and TiB2. Additive Manufacturing, 36, Article ID: 101458. https://doi.org/10.1016/j.addma.2020.101458

has been cited by the following article:

• TITLE: Selective Laser Melting of Novel SiC and TiC Strengthen 7075 Aluminum Powders for Anti-Cracks Application

  AUTHORS: Yingjie Li, Hanlin Liao

  KEYWORDS: Selective Laser Melting (SLM), AA 7075, Fine Grain Strengthen, TiC, SiC, Green Laser

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.12 No.4, April 30, 2024

  ABSTRACT: The aerospace and military sectors have widely used AA7075, a type of 7075 aluminum alloy, due to its exceptional mechanical performance. Selective laser melting (SLM) is a highly effective method for producing intricate metallic components, particularly in the case of aluminum alloys like Al-Si-Mg. Nevertheless, the production of high-strength AA7075 by SLM is challenging because of its susceptibility to heat cracking and elemental vaporization. In this study, AA7075 powders were mechanically mixed with SiC and TiC particles. Subsequently, this new type of AA7075 powder was effectively utilized in green laser printing to create solid components with fine-grain strengthening microstructures consisting of equiaxial grains. These as-printed parts exhibit a tensile strength of up to 350 MPa and a ductility exceeding 2.1%. Hardness also increases with the increasing content of mixed powder, highlighting the essential role of SiC and TiC in SLM for improved hardness and tensile strength performance.