TITLE:
Metallurgical Microstructure Complexity in the Electron Beam Welding (EBW) Joint of Ti6246
AUTHORS:
Daniel Moreno, Yohanan Nachmana, Roei Saraga, Tal Rokah, Denis Panchenco, Michael Mansano, Elinor Itzhaky, Moshe Shapira
KEYWORDS:
Ti Alloys, Welding, Phase Formation, Hardness, Metallography
JOURNAL NAME:
Journal of Minerals and Materials Characterization and Engineering,
Vol.12 No.2,
March
29,
2024
ABSTRACT: Electron Beam Welding (EBW) is employed to both melt and unite materials, influencing their thermal history and subsequently determining the microstructure and properties of the welded joint. Welding Titanium alloys involves undergoing local melting and rapid solidification, subjecting the material to thermal stresses induced by a thermal expansion coefficient of 9.5 × 10 m/m°C. This process, reaching range temperatures from the full melting alloy to room temperature, results in phase formation dictated by the thermodynamic preferences of the alloyed elements, posing a significant challenge. Recent efforts in simulation and calculations have been undertaken elsewhere to address this challenge. This study focuses on a joint of two plates with differing cross-sectional areas, influencing heat transfer during welding. This report presents a case study focusing on the metallurgical changes observed in the microstructure within the welded zone, emphasizing alterations in the cooling rate of the welded joint. The investigation utilizes optical metallography, Vickers’s Hardness testing, and SEM (scanning electron microscopy) to comprehensively characterize the observed changes in addition to heat transfer simulation of the welded zone.