Article citationsMore>>

Li, H., Cao, Y., Liu, P., Li, Y., Zhou, A., Ye, F., Xue, S. and Yue, X. (2022) Ammonia-Nitrogen Removal from Water with gC3N4-rGO-TiO2 Z-Scheme System via Photocatalytic Nitrification-Denitrification Process. Environmental Research, 205, Article ID: 112434.
https://doi.org/10.1016/j.envres.2021.112434

has been cited by the following article:

• TITLE: TiO2-PES Fibrous Composite Material for Ammonia Removal Using UV-A Photocatalyst

  AUTHORS: Anh Phuong Le Thi, Masaru Ohshiro, Takaomi Kobayashi

  KEYWORDS: Ammonia Removal, Photocatalyst, TiO2-PES Composite Fiber, Fibrous Material

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.12 No.1, January 15, 2024

  ABSTRACT: This study focused on the development and characterization of TiO2-PES composite fibers with varying TiO2 loading amounts using a phase inversion process. The resulting composite fibers exhibited a sponge-like structure with embedded TiO2 nanoparticles within a polymer matrix. Their photocatalytic performance for ammonia removal from aqueous solutions under UV-A light exposure was thoroughly investigated. The findings revealed that PeTi8 composite fibers displayed superior adsorption capacity compared to other samples. Moreover, the study explored the impact of pH, light intensity, and catalyst dosage on the photocatalytic degradation of ammonia. Adsorption equilibrium isotherms closely followed the Langmuir model, with the results indicating a correlation between qm values of 2.49 mg/g and the porous structure of the adsorbents. The research underscored the efficacy of TiO2 composite fibers in the photocatalytic removal of aqueous under UV-A light. Notably, increasing the distance between the photocatalyst and the light source resulted in de-creased hydroxyl radical concentration, influencing photocatalytic efficiency. These findings contribute to our understanding of TiO2 composite fibers as promising photocatalysts for ammonia removal in water treatment applications.