TITLE:
Evaluation of the Performance of Lithium-Ion Accumulators for Photovoltaic Energy Storage
AUTHORS:
Toussaint Tilado Guingane, Dominique Bonkoungou, Eric Korsaga, Dieudonné Simpore, Soumaila Ouedraogo, Zacharie Koalaga, François Zougmore
KEYWORDS:
Photovoltaic Energy, Energy Storage, Lithium-Ion Accumulator, Modeling, MATLAB/Simulink Simulation
JOURNAL NAME:
Energy and Power Engineering,
Vol.15 No.12,
December
29,
2023
ABSTRACT: In a context of climate change exacerbated by the increasing scarcity of fossil fuels, renewable energies, in particular photovoltaic solar energy, offer a promising alternative. Solar energy is non-polluting, globally available and the most widely distributed resource on Earth. However, the intermittency of this energy source considerably limits its expansion. To solve this problem, storage techniques are being used, in particular, electrochemical storage using lithium-ion batteries. In this article, we will evaluate the performance of lithium-ion batteries when integrated into a photovoltaic grid. To do this, modelling and simulation of a photovoltaic system connected to a lithium-ion battery storage system will be carried out using MATLAB/Simulink software. A diagnostic of the energy consumption of the Kaya Polytechnic University Centre will be carried out, and the data will then be used in the simulator to observe the behaviour of the PV-Lion system. The results obtained indicate that lithium-ion batteries can effectively meet the centre’s energy demand. In addition, it was observed that lithium-ion batteries perform better under high energy demand than the other battery technologies studied. Successive storage systems with the same capacity but different battery technologies were compared. It was found that these storage systems can handle a maximum power of 4 × 105 W for lead-acid batteries, 6.5 × 105 W for nickel-cadmium batteries, 8.5 × 105 W for nickel-metal-hydride batteries, and more than 10 × 105 W for lithium-ion technology.